Diagram Part List

Motor, Resistance

Motor, Resistance - Product Image

Currently In Stock! (Explain)

Resistance motor.

NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips screw in the cam can be loosened to adjust the cam position.

Volume Discounts: (How do I qualify?)
Level 1	Level 2	Level 3
$94.55	$92.56	$89.58

* Images may not be identical to part.

#	Part Name (Click to view)	BOM Qty
2	REAR STABILIZER COVER	1
3	NLA Ramp	1
4	UPRIGHT	1
5	Stablizer, Rear	2
6	Stablizer, Front, Right	1
7A	Console, Display	1
7B	CNSL REPROG MODULE	1
8	Cover, Front Stabilizer	1
9	LEFT FRONT STABILIZER	1
10	RAMP COVER	1
11A	Track	4
11B	TRACK TAPE	2
12	Arm, Roller, Left	1
13	LIFT MOTOR	1
14	Pedal, Left	1
15	Power supply	1
16	POWER SWITCH	1
17	Plate, Power Cord	1
18	Crank	1
19	PULLEY	1
20	CRANK ARM	2
21	FRONT ROLLER ARM CAP	4
22	IDLER	1
23	RR RLR ARM CAP	1
25	Motor, Resistance	1
26	LOWER SADDLE BRACKET	2
27	LIFT FRAME BUSHING	2
28A	Eddy Mechanism	1
28B	RESISTANCE CABLE	1
29	LEFT PEDAL HANDLE	1
30	Bushing	8
31	LIFT FRAME AXLE	1
33	Snap Ring, Flywheel	2
34	Wheel	2
35	I-BOLT AXLE	2
36	RIGHT UPPER BODY LEG	1
37	ACCESSORY TRAY	1
38	Speed sensor	1
39	Clamp	1
40	Bearing, Sealed	2
41	RIGHT UPPER GRIP	1
42	MEDIUM CRANK SPACER	1
43	Magnet	2
44	Arm, Pedal, Left	1
45	RIGHT ROLLER ARM	1
46	Leg, Upper, Left	1
47	LEFT UPPER BODY ARM	1
48	LEFT UPPER GRIP	1
49	Pedal, Right	1
50	RIGHT LOWER GRIP	1
51	Wheel	4
52	LEFT LOWER GRIP	1
53	AXLE COVER	2
54	LEFT ROLLER ARM COVER	1
55	DISC COVER	2
56	SHIELD COVER	1
57	Bushing, Bracket, Motor	4
58	RIGHT PEDAL ARM	1
59	LEFT UPPER SADDLE BRACKET	1
60	RIGHT SADDLE BRACKET CVR	1
61	RIGHT UPPER BODY ARM	1
62	Foot, Stabilizer, Front	2
63	PULSE SENSOR	2
64	Screw	4
65	RAMP AXLE	1
66	LEFT OUTER LEG COVER	1
67	LEFT INNER LEG COVER	1
68	UPPER UPRIGHT COVER	1
69	LOWER UPRIGHT COVER	1
70	UPPER BODY LEG BUSHING	4
71	DISC	2
72	NLA LARGE BUSHING	4
73	LEFT SHIELD	1
74	RIGHT SHIELD	1
75	REAR SHIELD	1
76	FRAME COVER	1
77	UPPER BODY ARM COVER	2
78	KEY	2
79	Nut	2
80	ACCESSORY TRAY BASE	1
81	J-Bolt	1
82	PEDAL SPACER	2
83	SMALL CRANK SPACER	1
84	RIGHT PEDAL INSERT	1
85	LEFT PEDAL INSERT	1
86	Bearing, Sealed	2
87	Plate, Pedal, Right	1
88	Plate, Pedal, Left	1
89	Bolt	1
90	FRAME CAP	2
91	RAMP CAP	2
92	Foot, Leveler	4
93	C-RING (17MM)	1
94	Spring, Pedal	2
95A	Fastener	11
95B	Screw	11
96	Retainer	4
97	ROLLER AXLE	1
98	Tinnerman Clip	4
99	Nut, Locking	14
100	LARGE CRANK SPACER	1
102A	Nut, Locking	2
102B	Locknut	5
103	Pin, Pedal	2
104	Screw	80
105	LIFT FRAME	1
106	RAMP ROLLER	1
107	Fastener, Standoff	4
108	Wire Harnes 30"	1
109A	Monitor, Heart Rate	1
109B	Strap, Heartrate	1
110	Wire Harness	1
111	RIGHT PEDAL HANDLE	1
112	Power cord, 110V	1
113	DRIVE BELT	1
114	Wire Harness	1
115	Bushing, Nylon	4
116	Receiver	1
117	Bolt	4
118	Nut, Locking	2
119	Washer,FLAT,BlackZP,M8x38x2	2
120	Screw, Shoulder	2
121	RT UPPER SADDLE BRACKET	1
122	INCLINE STOP BRACKET	1
123	Bracket, Control Board	1
124	Screw	4
125	RIGHT INNER LEG COVER	1
126	RIGHT OUTER LEG COVER	1
127	Foot, Base	1
128	CRANK ARM WASHER	2
129	M10 LARGE WASHER	4
130	Screw	4
131	M8 FLAT HD SCRW W/LOCTITE	2
132	Screw	8
133	M6 WASHER	4
134	M10 X 48MM BOLT	1
135	Screw	1
136	M10 WASHER	4
137	Screw	16
138	Screw	10
139	Bolt	4
140	Screw	2
141	Washer	4
142	Screw	2
143	Screw	4
144	Screw	12
145	MECHANISM SPACER	2
146	Screw	4
147	Washer	1
149	Screw	6
150	Nut	2
151	M12 I-BOLT	2
153	Cover, Ramp, Center	2
	LIFT MOTOR WIRE HRNS	1
	Wire harness	1
	20" RESISTANCE MTR WIRE	1
	Wire, Jumper, Blue	1
	Wire, Jumper, White	1
	Wire Tie	1
	Cable Tie, Mounting	2
	Clamp, Cable, Long	11
	Cable Tie	5
	Wrench, allen	1
	DECAL, PEDAL ADJUST	2
	DECAL, RAMP ADJ LT	1
	DECAL, RAMP ADJ RT	1
	Decal, General Warning	1
	USER'S MANUAL	1
	Tool, Pliers, Snap ring	1
	NLA Mat, Floor	1
	Wire Harness	1
	Wifi Module	1

E11.7 - NTEL189132 Exploded Diagrams

Entire Unit
Pedal & Drive Assembly

Motor, Resistance

$96.54 / each

E11.7 - NTEL189132 Exploded Diagrams

CLICK HERE TO BREAK OUT OF THIS FRAME AND SHOW THE WHOLE PAGE