Motor, Incline
|
|
|
Incline actuator motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | NLA Cover, Footrail | 2 | 2 | Screw | 29 | 3 | LEFT FOOT RAIL | 1 | 4 | Deck Spring | 4 | 5 | Wire, IFit, Communication | 1 | 6 | Endcap, Front, Left, Ebony | 1 | 7 | Endcap, Front, Right | 1 | 8 | Door, Access, Ebony | 1 | 9 | Safety Key | 1 | 10 | Screw | 9 | 11 | Decal, Warning | 1 | 12 | Screw | 4 | 13 | Catch, Latch | 1 | 14 | Treadbelt | 1 | 15 | WALKING PLATFORM | 1 | 17 | NLA Guide, Belt | 2 | 18 | NLA Endcap, Rear, Left | 1 | 19 | REAR ROLLER | 1 | 20 | Endcap, Upright, Left / Right, Black | 2 | 21 | Screw, Self Drilling | 16 | 22 | Display, Console | 1 | 23 | Roller, Front | 1 | 24 | Magnet | 1 | 25 | Nut, Nylock | 9 | 27 | Spacer | 2 | 28 | Washer | 4 | 29 | Screw | 2 | 30 | Nut, Hex | 1 | 31A | Washer, Flat | 1 | 32 | Idler Roller | 1 | 33 | Screw | 2 | 34 | Screw | 1 | 35 | NLA Bushing | 1 | 37 | Spring, Extension | 1 | 38 | Tray, Accessory, Left | 1 | 38A | Tray, Accessory, Left | 1 | 38B | Washer, Flat | 1 | 39 | Wire Harness | 1 | 40 | Belt, Drive | 1 | 41 | Motor, Drive | 1 | 42 | Speed sensor | 1 | 43 | Tray, Accessory, Right | 1 | 44 | NLA Clamp, Sensor | 1 | 45 | Bracket, Hood | 4 | 46 | Wire, Jumper | 1 | 47 | LIFT FRAME | 1 | 48 | Screw | 2 | 49 | Plug, RCA | 1 | 50 | Wire Harness, Filter | 1 | 51 | Plate, Controller | 1 | 52 | Washer, Lock | 2 | 53 | Screw | 1 | 54 | Screw | 8 | 55 | Grip, Foam, Right | 1 | 57 | Power Cord Assembly | 1 | 58 | Receiver, Heart rate | 1 | 59 | Transformer | 1 | 60 | NLA Monitor, Chest, Heart Rate | 1 | 61 | Strap, Heartrate | 1 | 62 | FRAME,CNSL SPPT,BKWKL,ARPS | 1 | 63 | Screw | 5 | 64 | Insert, Pulse, Housing | 1 | 66 | Screw | 4 | 67 | NLA Cover, Motor, Lower | 1 | 68 | Grip, Foam, Left | 1 | 70 | Tool, Belt Adjustment | 1 | 71 | Insert, Pulse, Housing | 4 | 72 | Endcap, Rear, Right | 1 | 73 | Foot, Rear | 2 | 74 | Screw | 2 | 75 | Washer, Star | 2 | 76 | Nut | 4 | 77 | Screw | 2 | 79 | Tool, Adjustment, Belt | 1 | 80 | CONSOLE BASE | 1 | 81 | NLA Console, Display | 1 | 82 | Decal, Warning | 2 | 83 | Screw | 19 | 84 | Housing, Latch | 1 | 85 | CONSOLE BACK | 1 | 86 | Screw | 16 | 87 | Plate, Sensor, Pulse | 4 | 88 | Washer, Locking | 8 | 89 | Screw | 4 | 90 | Upright, Left | 1 | 91 | Screw | 2 | 92 | Screw | 2 | 93 | Wheel, Transport | 2 | 94 | Shock | 1 | 95 | Upright, Right | 1 | 96 | RAIL,DECK,RT,ALUM,SSVRT216101B | 1 | 97 | Bumper, Leveler | 4 | 98 | Screw | 4 | 99 | BASE | 1 | 100 | Endcap, Base | 2 | 101 | Decal, Caution, English | 2 | 102 | Screw | 1 | 103 | Motor, Incline | 1 | 104 | Bracket, Stop | 1 | 105 | Wire Tie | 1 | 106 | Clamp, Holder, Tie, Flat | 3 | 107 | Wire Tie | 1 | 108 | WIRE,Harness,ARPS | 1 | 109 | Endcap, Handrail | 2 | 110 | Screw | 4 | 110A | Screw | 4 | 111 | NLA Spacer | 2 | 112 | Cover, Footrail | 2 | 113 | Screw | 2 | 114 | Wire Harness | 1 | 115 | Wire Harness | 1 | 116 | Screw | 2 | 117 | Cable Tie, Mounting | 2 | 118 | Retaining Ring Kit | 1 | 119 | Wire Harness | 1 | 120 | Washer | 4 | | Envelope | 1 | | Grease | 1 | | Wire, Jumper, Blue | 1 | | Switch, On/Off | 1 | | Decal, N Logo | 1 | | Kit, Hardware | 1 | | Housing, Latch | 1 | | USER'S MANUAL | 1 | | LITERATURE PACKET | 1 | | NLA Heart Rate monitor, kit | 1 | | TECH SHEET | 1 | | Decal, Nordictrack | 1 | | Accessory Kit | 1 | |
|
